This guide provides a comprehensive walkthrough for installing the 2020.07 version of VXDIAG Subaru SSM3 and SSM4 (Subaru Select Monitor) diagnostic software. This version has been confirmed to work seamlessly with SSM4, allowing for comprehensive vehicle diagnostics.
Software and System Requirements for SSM4 Subaru
Before starting the installation, ensure your system meets the following requirements:
- Software Version: SSM3 2020.7; SSM4 V22.60; FlashWrite2 V1.3.4
- Operating System: Windows 7, Windows 8, or Windows 10
- Compatible Device: VXDIAG Subaru SSM3/SSM4 scan tool
- Language: English, German, Spanish, French, Italian
Downloading the SSM4 Subaru Software
Download the necessary software files from a reputable source. The package should include:
- SSM3 2020.7
- SSM4 V22.60
- FlashWrite2 V1.3.4
- Important: A separate SSM4 patch file is required and must be downloaded independently.
Step-by-Step SSM4 Subaru Installation Guide
Once you have downloaded all the necessary files, follow these steps:
1. Prepare the Software:
- Extract the downloaded software package to a convenient location, such as your desktop.
2. Install FlashWrite2:
- Locate the FlashWrite2 EU V1.3.4 setup file within the extracted folder.
- Double-click the setup file to begin the installation process.
- Accept the license agreement and proceed with the installation.
3. Install SSM3:
- Open the SSM3 folder.
- Run the setup file.
- Accept the license agreement.
- If prompted with Windows security warnings during driver installation, choose “Install this driver software anyway.”
4. Install Ssm4 Subaru:
- Open the SSM4 folder.
- Run the SSM4_EU_V22.6.0 setup file.
- Follow the on-screen prompts and accept the license agreement.
5. Install VX Manager:
- Locate and run the VX Manager setup file.
- Select the Subaru-SSM software for installation.
6. Apply the SSM4 Patch:
- Crucial Step: Copy the SSM4 patch file to your desktop.
- Right-click the patch file and select “Run as Administrator.” This step is essential for proper software activation.
7. Connect the VXDIAG Device:
- Connect your VXDIAG Subaru scan tool to your computer.
- Allow the necessary drivers to install automatically.
8. Finalizing the Setup:
- Upon successful patching, you might encounter a license expiration message for SSM3. Contact your VXDIAG vendor for license renewal using your device’s serial number.
- Select your region within the software.
After completing these steps, your SSM4 Subaru software should be ready to use for diagnosing Subaru vehicles.
