If your Honda’s battery died or was disconnected, you’ll likely need your radio or navigation code to unlock it. Don’t worry, getting your Navi Code Honda Gratis is easier than you think. This guide will show you how to find your VIN and serial number, which you’ll need to obtain your free unlock code.
Locating Your Honda VIN
Your Vehicle Identification Number (VIN) is a 17-digit code unique to your car. You can find it in several places:
- Driver’s Side Windshield: Look at the base of the windshield on the driver’s side.
- Vehicle Registration: Your VIN is printed on your vehicle registration documents.
- Insurance Documents: Check your insurance statement or proof-of-insurance card.
- Honda Financial Services Statement: Your VIN will be on any financial statements from Honda.
- Honda Correspondence: Look for your VIN on any surveys or official communications from American Honda.
Important Note: VINs use letters A-Z and numbers 0-9, excluding I, O, and Q. Ensure you haven’t mistaken the number 0 for the letter O or vice-versa.
Finding Your Device Serial Number
Your device’s serial number is crucial for obtaining your free Honda navi code. Here’s how to find it:
- 2013-2014 Odyssey or Pilot: These models don’t require a radio/navigation code. Consult your owner’s manual for system initiation instructions.
- Pre-2001 Models: The serial number is on the back of the device. You’ll need to schedule a service appointment with your local Honda dealer.
- Anti-theft ID Card: Check the anti-theft ID card (usually in the glove box) for the serial number. Some dealers also place a sticker with the serial number inside the glove box.
- 2001 and Later Models (Most): You can usually retrieve the serial number directly from the device’s display.
Retrieving the Serial Number from the Display (2001 and Later Models)
For most models from 2001 onwards, follow these general steps:
- Turn the Ignition ON: Turn the car’s ignition to the ON position.
- Check for “COdE”: Turn on the radio/navigation unit. If it displays “COdE,” proceed to the next step. If not, pull the backup fuse for one minute and repeat step 1.
- Turn Off the Device: Turn off the radio/navigation unit.
- Press Preset Buttons: Press and hold buttons 1 and 6 on the radio. While holding them, turn the device back on.
- Record the Serial Number: The display will alternate between “U” followed by four digits and “L” followed by four digits. Combine these digits to get your 8-digit serial number (ignore the U and L).
2003-2007 Accord with Navigation (Specific Instructions):
- Ignition to ACC (I): Turn the ignition to the Accessory position.
- Verify “COdE”: Ensure the audio unit displays “COdE.” If not, pull the backup fuse for a minute and repeat step 1.
- Turn Off Audio: Turn off the audio unit.
- Press and Hold Buttons: Press and hold the top halves of the SEEK/SKIP and CH/DISC buttons. While holding them, press and release the PWR/VOL knob.
- Record Serial Number: The display will alternate, showing “U” followed by four digits and “L” followed by four digits. Combine these digits for your 8-digit serial number (ignore the U and L).
Getting Your Free Honda Navi Code
Once you have your VIN and serial number, visit https://radio-navicode.honda.com/ to get your navi code Honda gratis. Enter your information in the “Get Codes” tab. The website operates Monday-Friday 6 am to 11 pm (CDT), Saturdays 6 am to 8:30 pm (CDT), and Sundays 6 am to 11 pm (CDT). You’ll need your phone number, zip code, and email address to receive your confirmation.
