The C1132 fault code, specific to Nissan vehicles, often appears alongside other codes like C1110 and C1111, indicating problems within the Anti-lock Braking System (ABS). This article delves into the C1132 Nissan code, outlining its causes, symptoms, and potential solutions.
C1132 Nissan: Decoding the Error
The C1132 code points towards an issue within the ABS system, typically related to the ABS pump motor or its control module. When coupled with C1110 (Controller Failure) and C1111 (ABS Pump Motor Problem), it strongly suggests a malfunction within the Bosch 8 ESP unit commonly found in certain Nissan models. This combination frequently triggers warning lights on the dashboard, signaling a potential safety concern.
Affected Nissan Models
While the C1132 can appear in various Nissan vehicles, it’s predominantly observed in:
- Nissan Qashqai (2007-2013)
- Nissan Qashqai+2 (2007-2013)
These models often utilize the Bosch 8 ESP system, making them susceptible to the issues associated with the C1132 code.
Recognizing the Symptoms
A C1132 Nissan fault code often manifests through:
- Illuminated ABS and/or Engine Management Light: This is a direct indication that the car’s diagnostic system has detected a problem within the ABS.
- Continuously Running ABS Pump Motor: Even after the car is switched off, the pump motor might continue running, indicating a fault within the control unit or a potential electrical issue.
Identifying the Root Causes
The C1132 Nissan error typically stems from:
- Internal Fault in the ABS Unit: A malfunction within the ABS module itself is the most common cause, often requiring specialized repair or replacement.
- Electrical Issues: While less frequent, problems with the power supply, grounding, or fuses connected to the ABS unit can also trigger the C1132 code. It’s crucial to rule out these simpler possibilities before assuming a complete ABS unit failure.
Addressing the C1132 Nissan Code
When encountering the C1132 error, the following steps are recommended:
- Professional Diagnosis: Using a specialized scan tool to confirm the presence of the C1132 and related codes is crucial for accurate diagnosis.
- ABS Unit Inspection: Thoroughly examine the ABS unit for any visible damage, loose connections, or signs of corrosion.
- Electrical System Check: Verify the integrity of the power supply, ground connections, and related fuses to ensure they’re not contributing to the problem.
- Remanufacturing or Replacement: If the ABS unit is confirmed as faulty, remanufacturing or replacement is often the most effective solution. Remanufacturing involves restoring the unit to its original operating condition, providing a cost-effective alternative to a brand new unit.
Specific Bosch 8 ESP part numbers frequently associated with this issue include:
- 0 265 950 616
- 0 265 950 674
- 0 265 951 223
- 0 265 951 224
- 0 265 951 528
- 0 265 951 743
Addressing the C1132 Nissan fault code promptly ensures the proper functioning of your vehicle’s ABS, contributing to safer driving conditions.
