Updating the Becker Map Pilot navigation system can seem daunting, but with a clear guide, the process is straightforward. This article provides a detailed walkthrough, ensuring your Becker Map Pilot is up-to-date and ready for your next journey. This initial setup requires specific steps to ensure your PC or Mac recognizes the device. After the firmware update, connecting your device should be a simple plug-and-play process.
Preparing for the Becker Map Pilot Update
Before starting the Becker Map Pilot Update, gather the necessary equipment:
- Becker Map Pilot Device: This is the navigation unit you’ll be updating.
- Mini USB Cable: This cable connects the Becker Map Pilot to your computer.
- Computer: A desktop PC or laptop is required. Note: For initial firmware updates on a Mac, you must first update the firmware using a Windows PC.
Connecting the Becker Map Pilot to Your Computer
Follow these steps to connect your Becker Map Pilot for the becker map pilot update:
-
Remove the Device: Press the release latch and slide the Becker Map Pilot out of its mount.
-
Power Down and Prepare: Turn off your computer. Remove the battery cover from the back of the Becker Map Pilot by sliding it outwards.
-
Remove the Battery: Gently lift the front edge of the battery and slide it outwards.
-
Connect the USB Cable: With the battery removed, connect the mini USB cable to the Becker Map Pilot.
-
Connect to the Computer: Keep the computer off and the battery out of the Becker device. Connect the other end of the USB cable to an available USB port on your computer.
-
Reinsert Battery and Cover: Replace the battery and the battery cover on the Becker Map Pilot.
Installing Becker Content Manager
-
Power On and Recognize Device: Turn on your computer. The Becker Map Pilot should appear as a drive in your file explorer after a few moments.
-
Locate and Run Setup: Find the Becker Content Manager setup file (setup.exe) within the Becker device drive (usually under a “Win” subfolder). Double-click the file to run the installer. The drive letter may vary depending on your system.
-
Install Becker Content Manager: Follow the on-screen prompts to install the Becker Content Manager software.
-
Name Your Device: Once installed, launch Becker Content Manager. The software will detect your device and prompt you to name it.
-
Initialization: Allow Content Manager to initialize and create necessary files. This process sets up the software to manage content on your Becker Map Pilot.
Performing the Becker Map Pilot Update
- Firmware Update: Content Manager may automatically prompt you to install the latest firmware. If so, click “OK” and allow the download and installation to complete.
If not prompted automatically, navigate to the “Buy” tab in Content Manager. Create a Becker account if you don’t already have one. You can find the free Becker MAP PILOT Software update in the store. Follow the steps to “purchase” the free update.
- Reconnect and Update Maps: After the firmware update, you can connect your Becker Map Pilot to your computer (including Macs) by simply plugging it in. To update maps (free within 60 days of activation), go to the “Buy” tab and select the desired map package. Follow the provided instructions.
By following these steps, your Becker Map Pilot will be equipped with the latest firmware and map data, ensuring accurate and efficient navigation. Remember to always back up important data before performing any updates.
